Glass Cloth Tape
Product Descriptions:
Product Applications:
Glass cloth tape is made of glass
fiber cloth with excellent performance as
the base material, coated with silicone
pressure-sensitive adhesive on both sides,
and then covered with a fluorine release
film. The tape has excellent tensile
strength, friction resistance, high
temperature resistance, solvent resistance,
and good electrical insulation properties,
making it widely used in the field of
electrical insulation. For example,
interlayer insulation, bundling, lead
insulation, maintenance and general
insulation protection of motors, coils and
transformers.
▪ Electrical insulation applications, such
as coil windings and motor insulation where
the operating temperature may be very high
▪ White glass cloth tape can also be used
for printing in high temperature label
applications
▪ Car as high temperature wire harness tape
▪ Insulation wrapping of high-energy lithium
manganese battery
▪ High temperature sandblasting protection
and high temperature shielding protection
Features/Benefits
▪ Fiberglass tape can maintain
flexibility and maintain its adhesion under very
cold or high temperature conditions
▪ Use this product for high temperature masking
under extreme conditions.
▪ The material has high stability and slow
performance degradation, which can meet the
long-term use requirements under thermal cycling
conditions
▪ Good adhesion and stickiness
▪ Excellent resistance to solvents, varnishes,
resins, etc.
Mechanical Properties:
| Name | Glass cloth Tape |
| colour | White |
| Adhesion N/25mm | 6.0-15 |
| Backing | Glass cloth |
| Adhesive | Silicone |
| Backing Thickness | 0.13mm |
| Total Thickness | 0.18mm |
| Dielectric strength | 2000-3000 |
| Tensile strength N/cm | 315 |
| Operating Temp. | 250℃(480℉) |
| Note: The data recorded in this TDS are representative values rather than guaranteed values. To improve product performance, specifications are subject to change without notice. The use of the product recorded in this TDS is only an example. The product can have various application scenarios and environments, which are beyond our control. Therefore, you need to make your own sufficient before using the product to determine whether the product is suitable for your production process and conditions. Evaluate to confirm whether its performance and effect are in line with expectations. For Industries that need to be considered safe, please test and confirm their safety in advance. In addition, the company does not guarantee that the use described in this TDS will not cause any patent infringement. Before using this product, please carefully read the explanatory text and safety data sheet (MSDS) marked on the main body of the product. This product is manufactured for general industrial Industries. Do not use for medical purposes. The product may precipitate during storage. This is a normal phenomenon. Please mix well before use and strictly follow the product storage and transportation instructions. In order to obtain the best performance, the bonding surface should be clean, dry and free of grease. For high-strength structural bonds, special surface treatment can increase bond strength and durability. The material taken out of the container may be contaminated during use. Do not put the material back into the original container. Duxerialscannot be held responsible for products that are contaminated or stored under non-instructed conditions. | |